Wetted parts Type 316 S/S nozzle tools system with rotor ring and stator ring opposing. Outer rotor with 2860 - 0.5 mm. dia. nozzles/outer stator with 2805 - 0.5 mm nozzle propagate 150 psig. pressurization/cavitational sequences over 500 million times per second. 
1-1/2" 150# flange inlet and 1-1/2" flange outlet.
Double mechanical seal with viton o-rings on shaft for operation to 150 psig at 280 deg. F.
Ball bearing mounted shaft, 2 angular, 1 cylindrical in cast iron bearing housing oil lubricated.
Belt driven at 7200 RPM by 40 HP, 3600 RPM, explosion proof motor. For use on 3/60/230 or 460 volt service. Starter omitted. 304 S/S base.
Price Ea: $72,777.00 
Additional for mechanical seal cooling and pressurization system
with explosion proof electricals. Includes recirculation pump,
heat exchanger, reservoir, pressure gauges, back pressure valve, pressure
switch and flow switch preventing grinder operation unless system is on.  $7,978.00

Additional for installed double mechanical seal cooling and pressurization
system including recirculation pump, heat exchanger, reservoir,
back pressure gauge, back pressure valve, pressure switch and flow switch. 
Unit is installed on portable push dolly with 6 x 3 Dicon and 40 HP
motor starter (specify voltage). All necessary interconnecting  
hydraulic tubing between seal system and seal is installed. Wiring
between motor starter for Dicon and flow switch/pressure switch is provided.
All controls and switches are installed in NEMA 4X enclosure (not explosion proof)
(8-10 week delivery). $17,942.00

Terms: 30% down payment with order, balance Net 30 days.
FOB: Carlstadt, New Jersey   Quote valid for 30 days
Shipment: 12 weeks following receipt of order down payment. 
If expedited shipment is required, please consult factory.
Subject to terms and conditions.
You may also refer to our MIXER FORM to make sure that we receive all of the details of your specific requirements.