Model 6 x 3
Wetted parts Type 316 stainless steel. Toothed impeller and toothed liner. Discharge grid pattern is 18 rows x 17 rows of 1/8" diameter openings (306 holes). Consult factory for alternative grid configurations.
6" diameter conical inlet flange welded to 8" long stub having 3/4" NPT fitting with plug and 1/4" NPT fitting with plug. 3" diameter conical outlet flange welded to 6" long stub having 3/4" NPT fitting with plug and 1/4" NPT fitting with plug. Conical flanges have Viton o-ring where held to Dicon body by quick release clamps. Stubs have 150 lb. ASA Carbon Steel flanges.
Sanitary clamp style connections available.
Double mechanical seal with Viton o-rings for operation up to 150 psig at 280 degrees F.
Directly coupled to and mounted on 30 HP 3600 RPM explosion proof motor. For use on 3/60/230-460 service. Starter not included. With Painted Carbon Steel base.
Dimensioned per dwg. E8060
                                                                                                                                                               Price Ea: $27,247.00
Additional for solvent resistant "O" rings and double mechanical seal.                                                     $1,777.00
Additional for mechanical seal cooling and pressurization system with explosion
proof electricals. Includes recirculation pump, heat exchanger, reservoir, pressure
gauges, back pressure valve and pressure/flow switch preventing grinder operation unless
system is on.                                                                                                                                                          $7,410.00
Additional for installed double mechanical seal cooling and pressurization
system including recirculation pump, heat exchanger, reservoir,
back pressure gauge, back pressure valve, pressure switch and flow switch. 
Unit is installed on portable push dolly with 6 x 3 Dicon and 7.5 HP
motor starter (specify voltage). All necessary interconnecting
hydraulic tubing between seal system and seal is installed. Wiring
between motor starter for Dicon and flow switch/pressure switch is provided.
All controls and switches are installed in NEMA 4X enclosure (not explosion proof)
(8-10 week delivery).                                                                                                                                        $14,109.00
Terms: Net 30 days after credit approval.
FOB: Carlstadt, New Jersey   Quote valid for 30 days
Shipment:  6-8 weeks following receipt of order. 
If expedited shipment is required, please consult factory.
Shortened delivery can often be arranged.